Part 1: System cardDel 1: Systemkort
1. Core Function
The Global Maritime Distress and Safety System (GMDSS) delivers automated distress alerting, search-and-rescue (SAR) coordination, and Maritime Safety Information (MSI) worldwide by combining terrestrial digital radio, Recognized Mobile Satellite Services, and 406 MHz Cospas-Sarsat satellite beacons1. Mandated under SOLAS Chapter IV for passenger ships and cargo vessels of 300 gross tonnage and above on international voyages, it shifts maritime safety from a ship-to-ship model to shore-coordinated response3. Regardless of operating latitude, automated alerts route directly to Maritime Rescue Coordination Centres (MRCCs) and nearby shipping1.
2. Primary Operational Tasks
- Ship-to-Shore Distress Alerting: Transmit distress alerts using at least two separate, independent means—each operating over a different radiocommunication service, such as terrestrial DSC, a satellite Ship Earth Station (SES), or a float-free 406 MHz EPIRB1.
- Ship-to-Ship Alerting & Relays: Transmit and receive ship-to-ship distress alerts and receive shore-to-ship distress alert relays to mobilize nearby vessels1.
- SAR Coordination & On-Scene Voice: Conduct distress, urgency, and safety radiotelephony between MRCCs, rescue units, and vessels in distress, including 121.5 MHz and 123.1 MHz aeronautical frequencies on passenger ships1.
- Automated MSI Reception: Continuously capture navigational warnings, meteorological warnings and forecasts, piracy advisories, and SAR notices via NAVTEX and satellite Enhanced Group Call (EGC) broadcasts7.
- Survival Craft Homing: Guide rescue vessels and aircraft to lifeboats and liferafts using 9 GHz Radar SARTs, AIS-SARTs, 121.5 MHz/AIS EPIRB locating transmissions, and portable two-way VHF radios7.
3. System Interconnections
- Inputs: Under SOLAS IV Regulation 18, all two-way GMDSS equipment capable of embedding position in distress alerts must receive automatic, continuous position fixes from an internal or external Electronic Position Fixing System (GNSS/EPFS) over serial (NMEA 0183 / RS-422) or LAN interfaces; if the navigation receiver fails, position and the time of determination must be updated manually at intervals not exceeding 4 hours while under way7. Float-free EPIRBs installed on or after 1 July 2022 carry an integral GNSS receiver15. Power feeds combine 230V AC bridge mains, 24V DC emergency shipboard supply, and dedicated GMDSS reserve battery banks17.
- Outputs: Distress alerts route through VHF/MF/HF coast stations, Recognized Mobile Satellite Service (RMSS) gateways, and Cospas-Sarsat Local User Terminals and Mission Control Centres directly to MRCCs4. Simultaneously, terrestrial DSC alerts notify surrounding ships, while post-July 2022 AIS-equipped EPIRBs broadcast AIS Message 14 locally to vessels within VHF range1. Survival-craft locating devices paint 12 equally spaced dots (expanding into arcs and concentric circles at close range) on X-band radar displays (Radar SART) or plotted target icons on AIS and ECDIS screens (AIS-SART and AIS-EPIRB), while modern Satcom and NAVTEX units can forward MSI, GNSS, and alert status to ECDIS, Integrated Navigation Systems (INS), and Bridge Alert Management (BAM) displays19.
4. Redundancy and Criticality
SOLAS Chapter IV Regulation 15 requires vessels to guarantee radio availability through three approved methods: duplication of equipment, shore-based maintenance, or at-sea electronic maintenance capability7. Vessels operating in Sea Areas A1 or A2 must apply at least one method, whereas vessels in Sea Areas A3 or A4 must combine at least two methods7. Under Regulation 13, dedicated reserve battery banks—arranged so no single fault in the reserve energy system can disable both basic and duplicated equipment17—must power mandatory radio installations and emergency console illumination for 1 hour on ships equipped with a compliant emergency source of electrical power (such as a SOLAS II-1/42 or 43 emergency generator), or 6 hours on ships without one, backed by automatic chargers capable of restoring minimum capacity within 10 hours21.
Part 2: Technical deep diveDel 2: Teknisk dybdeanalyse
1. GMDSS Sea Areas (A1, A2, A3, A4)
On 1 January 2024, IMO Resolution MSC.496(105) (paired with MSC.497(105) for the 1988 SOLAS Protocol) entered into force, introducing the most extensive structural revision to SOLAS Chapter IV since the inception of GMDSS1. Rather than classifying carriage mandates by vessel size alone, GMDSS assigns equipment requirements across four operational Sea Areas—A1, A2, A3, and A4—recorded on the vessel's Cargo Ship Safety Radio Certificate (Form R)2. Under Regulation 7, every SOLAS vessel regardless of Sea Area must carry a common baseline: a VHF installation capable of DSC alerting and continuous watch on Channel 70 (156.525 MHz) plus radiotelephony on Channel 6 (156.300 MHz), Channel 13 (156.650 MHz), Channel 16 (156.800 MHz), and working channels (156–174 MHz); MSI receiver(s) covering the entire intended voyage; a float-free 406 MHz satellite EPIRB (VHF-EPIRBs are no longer acceptable even in Sea Area A1); and survival-craft equipment relocated from SOLAS Chapter III into Chapter IV Regulations 7.2 and 7.31. Specifically, cargo ships of 300 GT to under 500 GT must carry at least one Radar SART or AIS-SART and two portable two-way VHF radiotelephones, whereas passenger ships and cargo ships of 500 GT and above require one Radar SART or AIS-SART on each side of the vessel (two total) and three portable two-way VHF units1. Passenger ships must also fit a dedicated distress panel at the conning position and two-way aeronautical radiocommunications on 121.5 MHz and 123.1 MHz1.
The 2024 amendments replaced all statutory references to "Inmarsat" with the generic term Recognized Mobile Satellite Service (RMSS) and eliminated obsolete Narrow-Band Direct Printing (NBDP) telex carriage requirements for MF/HF distress and safety traffic2. Crucially, Sea Area A3 is now defined dynamically by the coverage footprint of the specific RMSS Ship Earth Station (SES) carried onboard and named in brackets on the Safety Radio Certificate1. As a result, MF/HF radio is no longer categorized as primary equipment for Sea Area A3 and remains primary equipment solely for Sea Area A4, though an MF/HF transceiver may still fulfill A3 duplication requirements alongside one RMSS terminal29. As documented in the 2024 IMO GMDSS Manual, IMO-recognized satellite service providers comprise Inmarsat, Iridium Satellite LLC (recognized in 2018 and operational since 2020), and China Transport Telecommunication Information Group's BeiDou Message Service System (BDMSS, recognized in November 2022 for regional use, with operational implementation contingent on resolving outstanding technical issues)3. All RMSS providers operate under International Mobile Satellite Organization (IMSO) oversight, governed by revised criteria in IMO Assembly Resolution A.1203(34) (adopted 3 December 2025)9.
Sea Area | Geographical & Functional Boundary | Area-Specific Carriage (Beyond Reg. 7 Baseline) | Post-2024 Regulatory & Coverage Notes |
|---|---|---|---|
A1 | Within radiotelephone coverage of at least one VHF coast station providing continuous Ch. 70 DSC alerting, as defined by a Contracting Government (e.g., typically 20–50 NM offshore under Indian administration rules)1. | VHF Ch. 70 DSC initiation from the conning position; secondary ship-to-shore alerting via 406 MHz satellite EPIRB (or MF/HF/RMSS)1. | VHF-EPIRB is prohibited in lieu of a 406 MHz satellite EPIRB as of 1 January 20242. |
A2 | Excluding A1, within radiotelephone coverage of at least one MF coast station providing continuous 2187.5 kHz DSC alerting, as defined by a Contracting Government1. | MF radio installation (2187.5 kHz DSC TX/RX and continuous watch, 2182 kHz R/T, working frequencies 1605–4000 kHz) plus secondary alerting via 406 MHz EPIRB, HF, or RMSS SES1. | SOLAS defines A2 functionally by coast station coverage rather than a fixed nautical-mile range1; MF relies on surface groundwave propagation38. |
A3 | Excluding A1 and A2, within the continuous alerting coverage of the RMSS supported by the vessel's onboard SES1. | RMSS SES (Inmarsat or Iridium) for distress alerting and MSI reception, paired with an MF (2187.5 kHz DSC / 2182 kHz R/T) or MF/HF installation, plus duplicated A3 equipment (second SES or full MF/HF transceiver)1. | Inmarsat GEO coverage spans 76°N–76°S per IHO data (up to 78°N achieved; 72°N–72°S cited in some commercial tables)19. Iridium LEO covers all latitudes; dual Iridium SES eliminates A4 where accepted by the Flag State2. |
A4 | All sea areas outside A1, A2, and A3 (polar waters outside GEO satellite coverage, or all waters beyond A1/A2 if no RMSS SES is fitted)1. | Full MF/HF installation (1605–4000 kHz and 4000–27,500 kHz) maintaining DSC watch on 2187.5 kHz, 8414.5 kHz, and at least one of 4207.5, 6312, 12577, or 16804.5 kHz, with instant selection of all six1. | Vessels operating in polar waters using Inmarsat GEO terminals must carry duplicated MF/HF39; MF/HF NBDP telex is no longer mandatory2. |
2. VHF & MF/HF with Digital Selective Calling (DSC)
Digital Selective Calling forms the automated signaling backbone of terrestrial GMDSS, defined technically in Recommendation ITU-R M.493 (updated to M.493-16 in 2023) and operationally in Recommendation ITU-R M.54137. Rather than requiring constant voice monitoring, DSC encodes distress, urgency, safety, and routine messages as synchronous digital frames built from a 10-bit error-detecting alphabet42. Each character comprises 7 information bits (encoding symbols 00–99 as two-digit decimal pairs and symbols 100–127 as service commands, transmitted least significant bit first) followed by 3 check bits representing, in binary, the count of B (binary 0) elements among the 7 information bits (transmitted most significant bit first)42. To overcome multipath fading and static bursts, every character after the phasing sequence is transmitted twice using time-spread DX/RX diversity: each initial character (DX) is followed by four intervening characters before its repetition (RX), creating a diversity interval of 400 ms on MF/HF and 33 1/3 ms on VHF42.
On VHF Channel 70 (156.525 MHz), DSC uses phase modulation (frequency modulation with 6 dB/octave pre-emphasis) driven by an audio sub-carrier centered at 1700 Hz shifting between 1300 Hz (Y-state / binary 1) and 2100 Hz (B-state / binary 0) at 1200 bit/s (±30 ppm), with a tone tolerance of ±10 Hz and modulation index of 2.0 ± 10%42. On MF (2187.5 kHz) and the five HF DSC distress channels (4207.5, 6312, 8414.5, 12577, and 16804.5 kHz), signaling employs F1B (direct FSK) or J2B (audio tones at 1700 Hz ± 85 Hz injected into an SSB transmitter) with a 170 Hz shift at 100 bit/s (±30 ppm), ±10 Hz station frequency stability, and a maximum receiver bandwidth of 300 Hz1. Each DSC frame begins with a 200-bit dot pattern and 20-bit phasing sequence for synchronization, followed by the Format Specifier (e.g., symbol 112 for a Distress Alert), Address (for directed calls) and Category, Self-Identification (the 9-digit MMSI encoded as two-digit pairs), Nature of Distress (symbols 100–111) or Telecommand, GNSS coordinates (Pos1) and UTC time, End of Sequence (EOS), and a final Error-Check Character (ECC)37.
Upon transmitting a DSC distress alert—which automatically repeats until acknowledged—coordinating stations transition to the paired radiotelephony voice frequency37. On VHF, Channel 70 alerts pair with Channel 16 (156.800 MHz) using FM, whose "capture effect" locks receivers onto the strongest signal while suppressing weaker co-channel interference; Channel 6 (156.300 MHz) handles intership SAR coordination, and Channel 13 (156.650 MHz) supports bridge-to-bridge navigation safety7. On MF, 2187.5 kHz DSC alerts transition to 2182 kHz Single Sideband (SSB) voice37. On HF, DSC alerts on the 4, 6, 8, 12, and 16 MHz calling channels pair with international SSB distress voice channels (4125, 6215, 8291, and 12290 kHz, plus the 16 MHz band allocated under ITU Radio Regulations Appendix 15)1. A DSC distress acknowledgement is transmitted as a single call addressed to "all ships" embedding the distressed vessel's MMSI37.
Terrestrial coverage is governed by sharply different radio propagation physics across bands. VHF propagates primarily via line-of-sight space waves, bounded by antenna elevation and the radio horizon38. MF (300 kHz – 3 MHz; marine band 1605–4000 kHz) propagates mainly by groundwave (surface wave), where electrical interaction with the Earth's surface tilts the lower wavefront forward; attenuation grows with frequency and decreases over high-conductivity seawater10. By contrast, HF (3–30 MHz; marine sub-bands spanning 4–25 MHz) relies on ionospheric skywave refraction50. During daylight, the lowest D-layer does not refract HF waves back to Earth but severely absorbs lower frequencies in proportion to solar radiation, peaking at midday54. The E-layer (8–24 km thick) weakens after sunset, while the F-layer—splitting into F1 and F2 by day and merging at night—provides the high-altitude, densely ionized F2-layer responsible for nearly all long-range HF circuits54. Operators select the highest usable band below the Maximum Usable Frequency (MUF) (above which waves escape into space) and above the Lowest Usable Frequency (LUF) (below which D-layer absorption and noise obscure the signal), following the rule that higher solar elevation supports higher usable frequencies54.
Because shipboard 6–12 m vertical whip antennas (or T / inverted-L wire antennas) are electrically short across 1.6–27.5 MHz, their feedpoint impedance varies dramatically with frequency and rarely matches a 50-ohm transceiver50. An MF/HF station must therefore be engineered as a cohesive RF system: 50-ohm coaxial cable runs from the transceiver to an Automatic Antenna Tuning Unit (ATU), which transforms impedance to match the radiator51. Crucially, the ATU must sit close to the antenna base with a low-impedance bond to the vessel's RF ground, feeding the radiating whip via a short, exposed, insulated high-voltage feeder rather than coaxial cable51. A separate 3–6 m receiving whip typically feeds the dedicated DSC watchkeeping receiver to avoid desensitization during high-power transmissions42.
3. Satellite Communications & MSI (NAVTEX / EGC)
Modern satellite GMDSS offers two distinct architectures following IMO recognition of Iridium and the 2024 SOLAS shift to RMSS neutrality2. Inmarsat-C (and Mini-C) long served as the universal Sea Area A3 standard, transmitting 0.6 kbps store-and-forward text messages and providing a dedicated 5-second distress button that dispatches MMSI, GNSS coordinates, and distress nature directly to an MRCC8. Because Inmarsat relies on geostationary (GEO) satellites—reported in IHO MSI updates as three operational I-4 satellites spanning 76°N to 76°S (with up to 78°N achieved), while commercial vendor comparisons cite 4 GEO satellites covering 72°N to 72°S—high-latitude polar waters remain outside reliable GEO footprints19. Legacy FleetBroadband terminals (FB250/FB500, offering 284–432 kbps standard IP data and 128–256 kbps streaming) supported only a non-GMDSS "505" emergency voice dialing service58. To bridge that gap, Inmarsat launched Fleet Safety in May 2022, bringing full SOLAS GMDSS distress alerting, priority voice, and MSI reception onto its I-4 and GX broadband networks via SafetyNET II and RescueNET59.
Iridium GMDSS, introduced via the compact Lars Thrane LT-3100S and expanded in Q3 2024 with IMO approval of Iridium Certus GMDSS terminals (announced by Lars Thrane, Intellian, Thales, and Cobham Satcom), operates through 66 active Low Earth Orbit (LEO) satellites plus 9 spares in near-polar orbits19. Because LEO satellites orbit overhead across all latitudes, Iridium delivers truly global coverage including Arctic and Antarctic waters with continuous inter-satellite handoffs and minimal weather attenuation11. The LT-3100S integrates Distress Alert, Safety Voice, and Iridium SafetyCast alongside built-in LRIT and SSAS functions over 2.4 kbps Short Burst Data (SBD), exposing alerts and MSI on RS-422 and LAN interfaces to BAM/INS consoles without requiring a paper printer19. Pressing the distress button sends the digital alert and then automatically initiates a priority Safety Voice call to an RCC (pre-empting commercial traffic), allowing crews to relay emergency specifics verbally or select an RCC matching their working language11.
System Attribute | Inmarsat-C / Mini-C | Inmarsat Fleet Safety | Iridium GMDSS (LT-3100S / Certus) |
|---|---|---|---|
Orbit & Space Segment | Geostationary (3 operational I-4 per IHO; 4 GEO in vendor sheets)12 | Geostationary (Inmarsat I-4 & GX networks)60 | 66 operational LEO satellites + 9 in-orbit spares19 |
Coverage Area | ~76°N–76°S per IHO (up to 78°N observed; 72°N–72°S in some vendor sheets)19 | GEO ocean region footprint12 | All latitudes including Arctic & Antarctic (eliminates A4 when duplicated and Flag-approved)2 |
Data & Voice Capability | 0.6 kbps store-and-forward text; no voice19 | Broadband IP + priority safety voice & messaging59 | 2.4 kbps SBD (LT-3100S); 88–1408 kbps IP tiers on Certus; auto-dial Safety Voice to RCC11 |
EGC / MSI Platform | SafetyNET / SafetyNET II59 | SafetyNET II (web portal, read receipts)59 | Iridium SafetyCast (MSC.1/Circ.1613/Rev.2)13 |
Bridge Integration | LRIT & SSAS (with accessories); requires printer8 | Web-based interface across FleetBroadband59 | Built-in LRIT/SSAS; RS-422 & LAN outputs to BAM/INS; browser MSI review19 |
Oceanic MSI relies on satellite Enhanced Group Call (EGC) broadcasts. Legacy SafetyNET directs alerts across four Ocean Regions using 6-digit C-codes targeting fixed NAVAREAs/METAREAs, coastal warning zones, or dynamic circular/rectangular SAR areas, automatically rebroadcasting priority alerts after 6 minutes if a vessel missed the initial broadcast while tuned elsewhere12. SafetyNET II (introduced in 2017) adds IP-based web scheduling, simultaneous multi-network broadcasting across Inmarsat-C, Mini-C, and Fleet Safety, and vessel read receipts59. Maritime training literature highlights an important cybersecurity vulnerability: SafetyNET broadcasts are transmitted in plaintext without encryption or sender authentication, leaving them exposed to spoofing risks60. Iridium SafetyCast (governed by MSC.1/Circ.1613/Rev.2, which removed "Interim" status in July 2023) removes fixed GEO Ocean Region boundaries, supporting Global or Arctic Ocean Regions, fixed NAVAREAs/METAREAs, and user-defined polygons across Distress, Urgency, Safety, and Routine priorities13. Because coordination across all global NAVAREAs and METAREAs for SafetyCast continues, Iridium advises shipowners to verify regional broadcaster availability and Flag State acceptance11.
Within coastal waters—nominally 250–400 NM offshore (with realistic daytime coastal reception sometimes cited around 150–400 NM)—NAVTEX provides automated terrestrial MSI broadcasts14. Although MSC.496(105) generalized Regulation 7.1.4 to "MSI receiver(s)" rather than mandating NAVTEX explicitly by name, dual-channel NAVTEX receivers remain standard coastal equipment7. They monitor 518 kHz continuously with priority for the International NAVTEX Service (strictly in English, coordinated by the IMO NAVTEX Coordinating Panel) while simultaneously receiving 490 kHz (National NAVTEX in local languages) or 4209.5 kHz (National HF "tropical" frequency used where heavy low-latitude static degrades MF reception)14. Broadcasts use Narrow-Band Direct Printing over SITOR-B (FEC collective B-mode) at 100 baud FSK with a 170 Hz shift using the 5-bit CCIR 476 / ITA2 character set, transmitting every character twice for forward error correction66. Messages open with a ≥10 s phasing signal and header ZCZC B1B2B3B4, closing with NNNN68. The B1 character (A–Z) identifies the station and assigns its 10-minute broadcast slot every 4 hours (e.g., Station A at 0000 UTC, B at 0010 UTC, G at 0100 UTC)14. Despite IMO recommendations to drop TX power from 1 kW by day to 300 W at night, nighttime MF skywave propagation regularly extends signals far past 400 NM, enabling distant co-B1 stations or slot overruns to corrupt local reception14. Serial numbers B3B4 (01–99) distinguish messages per subject, while 00 overrides all receiver B1/B2 filters to force display67.
B2 Code | Subject Category | User Rejectable? | Receiver Behavior & Operational Notes |
|---|---|---|---|
A | Navigational warnings | No (Mandatory) | Always accepted and displayed/printed66. |
B | Meteorological warnings | No (Mandatory) | Always accepted and displayed/printed14. |
C | Ice reports | Yes | Selectable for polar/ice-prone waters14. |
D | Search & Rescue, piracy, tsunamis & natural phenomena | No (Mandatory) | Triggers built-in audible/visual receiver alarm14. |
E | Meteorological forecasts | Yes | Routine weather bulletins14. |
F | Pilot service messages | Yes | Port approach and pilotage notices66. |
G | AIS messages (formerly Decca) | Yes | Updated in current IMO NAVTEX Manual66. |
H | LORAN messages | Yes | Terrestrial radio-navigation advisories66. |
I | Not used (formerly OMEGA) | N/A | Decommissioned category66. |
J | SATNAV messages (GPS / GLONASS) | Yes | Satellite navigation integrity alerts66. |
K | Other electronic navaid messages | Yes | General electronic navaid degradation notices66. |
L | Additional navigational warnings | No (Mandatory) | Used when >99 active A warnings share one B1 station66. |
T / V / W | Test (UK) / Fishermen (US) / Environmental (US) | N/A (National/Unused) | Unofficial UK test (T); inactive US categories (V, W)66. |
X / Y / Z | Special services (X, Y); No message on hand (Z) | Status / IMO Panel | X/Y require IMO Panel approval; Z indicates idle traffic66. |
4. Distress Beacons & Locating Devices (EPIRB & SART)
The 406 MHz Cospas-Sarsat EPIRB provides independent ship-to-shore distress alerting even after total shipboard electrical failure. Upon activation, it transmits a 5 W digital burst in the 406–406.1 MHz band encoding a unique 15-Hex-ID (incorporating the registering nation's 3-digit Maritime Identification Digits [MID]) and acquired GNSS coordinates15. Following Cospas-Sarsat Council decision CSC-69, channel 406.076 MHz (Channel S) opened on 1 January 2025 and channel 406.031 MHz (Channel D) closed on 1 July 2025 for new type-approval certificates75.
As reported in Cospas-Sarsat System Data No. 51 as of 31 December 2025, the space segment operated 63 SAR payloads—3 LEOSAR, 11 GEOSAR, and 49 MEOSAR—expanding across more than 70 satellites by September 2026 and feeding 34 continuously manned Mission Control Centres (MCCs)4. These three orbital layers operate complementarily: LEOSAR satellites in low polar orbits achieve full Earth coverage and compute positions independently via Doppler shift, though legacy pass-wait times for LEOSAR/GEOSAR detection could take up to four hours74. GEOSAR satellites provide continuous, real-time detection across low and mid-latitudes without waiting for an orbital pass, but cannot cover extreme poles or generate Doppler fixes, relying instead on beacon-encoded GNSS coordinates74. MEOSAR payloads carried aboard Galileo, GPS III, and BeiDou (BDS) constellations overcome both limitations, delivering global coverage with typical alert times under 5–10 minutes and GNSS-independent localization calculated at MEOLUT ground stations using Time of Arrival (TOA) and Frequency of Arrival (FOA) differences across multiple satellites4. Galileo's SAR infrastructure also supports the Return Link Service (RLS), sending an acknowledgement back to RLS-capable beacons to confirm alert receipt83.
For final-phase homing by aircraft and surface vessels, EPIRBs emit a ~50 mW carrier on 121.5 MHz (Cospas-Sarsat ceased satellite processing of analog beacons—97% of which were false alarms per eoPortal—retaining 121.5 MHz strictly for local homing)4. Under IMO Resolution MSC.471(101)—mandatory for EPIRBs installed on or after 1 July 202215—every new float-free EPIRB must integrate: a built-in GNSS receiver (commercially supporting GPS, Galileo, GLONASS, or BDS, improving position accuracy from ~10 km to under 10–100 m per vendor and industry figures)15; an AIS locating transmitter (161.975 / 162.025 MHz) broadcasting AIS Message 14 with the 15-Hex-ID to ships within ~4–8 NM without colliding with 406 MHz bursts or violating the ≥50% (1.125 s on/off) 121.5 MHz duty cycle15; a high-intensity visible strobe (20–30 flashes/min per navlib) plus an infrared (IR) light visible to night-vision devices22; and a float-free housing fitted with a Hydrostatic Release Unit (HRU) (typically limited to 2 years onboard service life per manufacturer specifications) engineered to release the beacon before reaching 4 meters depth at any list or trim15. External sea-water contacts trigger automatic activation only after floating clear of the enclosure, whereas manual activation requires two independent actions15. Accurate national registration of the 15-Hex-ID (separate from manufacturer warranty registration) remains essential for SAR verification, especially given UK MCA data showing 92% of UK 406 MHz distress alerts in 2024 were false alarms4.
For survival craft localization, vessels may carry either 9 GHz Radar SARTs (MSC.510(105)) or AIS-SARTs (MSC.246(83), permitted since 2010)88. Because each device depends on a different shipboard sensor, watchkeepers must match the target to its receiver: a Radar SART produces no AIS target, and an AIS-SART produces no raw X-band radar video return16.
Parameter | 9 GHz Radar SART (MSC.510(105)) | AIS-SART (MSC.246(83)) |
|---|---|---|
Operating Frequency & RF | 9.2–9.5 GHz (X-band, 3 cm) exclusively; horizontal or circular polarization; 400 mW EIRP and better than -50 dBm RX sensitivity per commercial specs; invisible on 3 GHz S-band radar25. | 161.975 MHz (AIS1) & 162.025 MHz (AIS2) VHF; ~1 W TX power; transmits 8 messages per minute per SNL (manufacturer guides also cite ~30 s intervals)73. |
Target Presentation & ID | Swept response generates 12 equally spaced dots (~0.64 NM spacing) radiating outward along the survivor's bearing on X-band radar; within <1 NM, dots expand into arcs and then full concentric circles16. | Permanently coded 9-digit MMSI beginning with 970 (970YYZZZZ: 2-digit maker code + 4-digit serial)89. Broadcasts internal GNSS coordinates rendered as a dedicated circle-with-cross AIS-SART symbol on Class A/B AIS and ECDIS26. |
Detection Range | At least 5 NM from shipborne X-band radar (15 m antenna height; operational reports cite 6–15 NM) and up to 30 NM from airborne radar (10 kW peak at 3,000 ft)90. | Typically 5–10 NM ship-to-survival-craft; comparative testing indicates VHF AIS propagation can outperform 9 GHz radar detection at equal 1 m antenna heights32. |
Endurance & Mounting | 96 hours standby followed by 8 hours continuous interrogation at 1 kHz PRF; antenna mounted ≥1 m above sea level on a telescopic pole16. | 96 hours active transmission; antenna mounted ≥1 m above sea level with unobstructed sky view for internal GNSS lock16. |
5. Testing, Reserve Power & Failure Modes
Systematic operational testing ensures defective circuits or depleted batteries are identified in port rather than during an emergency, with all results entered in the GMDSS Radio Logbook100.
Interval | Mandatory GMDSS Verification & Acceptance Criteria |
|---|---|
Daily | Run internal non-radiating DSC self-tests on VHF and MF/HF sets to check internal circuitry, display, and audio/visual distress alarms100. Verify Satcom terminal login, NAVTEX reception, and printer readiness100. Measure reserve battery voltage OFF-LOAD (>24 V / ~26–27 V float on 24V banks; ~13.4 V on 12V banks) and ON-LOAD (open MAIN AC IN breaker, confirm AC-fail alarm and DC lamp, then key PTT on MF/HF on an idle, non-distress R/T channel; voltage drop must not exceed 10%, or ≤1.5 V per console checklists)102. |
Weekly | Transmit a live DSC external test call to a DSC coast station over one of the six MF/HF distress/safety channels (and VHF where supported) when within range101. Execute Satcom diagnostic/Performance Verification (PV) checks per terminal schedule and inspect portable equipment batteries101. |
Monthly | Perform a non-alert EPIRB self-test (verifying battery voltage, TX power, frequency, and strobe) and inspect housing, safety clip, battery expiry, and HRU expiry102. Conduct a brief Radar SART bridge-wing test (strictly limited to a few seconds per MSC.510(105) to prevent interference and battery drain), confirming at least 11 concentric circles at ~0.64 NM spacing on the 12 NM X-band scale90; for AIS-SART, activate test mode and verify 'AIS TEST' with the 970 ID on AIS/ECDIS94. Test portable survival-craft two-way VHF units on a non-Ch. 16 working channel using a dedicated spare battery (never compulsory batteries)100. Check non-sealed wet-cell electrolyte levels (demineralized water only) and cell-by-cell Specific Gravity (healthy >1.240)103. Inspect monkey-island antennas and coaxial runs for secure mounting, damage, and salt deposits102. |
Annual | Perform a battery capacity test at intervals ≤12 months when not at sea by fully discharging and recharging the reserve bank over a normal operating period (e.g., 10 hours) to verify 1-hour or 6-hour endurance21. Complete the statutory annual GMDSS radio survey by a qualified surveyor100. |
Under SOLAS IV Regulation 13, battery bank sizing reflects shipboard power architecture: 1 hour if a fully compliant SOLAS II-1/42 or 43 emergency source of electrical power supplies the radio installations, or 6 hours if not21. Per UK Maritime and Coastguard Agency (MCA) guidance (MGN 641), the bank must continuously supply the VHF installation, emergency radio lighting, connected navigation sensors, and either all installations connectable simultaneously or the single highest-draw installation21. Specifically, MGN 641 weights VHF at full receive current plus 1/5 (20%) transmit current; MF or MF/HF at receive/ready current plus 1/3 (33.3%) maximum speech transmit current; and Satcom SES at full receive current plus 1/4 (25%) maximum-mode transmit current27. For general distress load sizing, MGN 641 defines the electrical load equation27:

Minimum required battery ampere-hour capacity equals this summed distress current multiplied by the mandatory duration (1 hour with an emergency generator, or 6 hours without), and the automatic charger must restore minimum required capacity within 10 hours21. Where an Uninterruptible Power Supply (UPS) provides reserve power, USCG 47 CFR 80.1099 requires transfer within 5 seconds of power failure28.
In operational service, an industry Electro-Technical Officer (ETO) troubleshooting guide estimates that roughly 80% of bridge and GMDSS faults trace to power supply disruptions, antenna/coax cable faults, corroded connectors, software freezes, post-blackout misconfiguration, failed backup batteries, and lost gyro/GNSS data feeds18. At the RF layer, water ingress, corroded terminations, and salt encrustation on monkey-island whip bases degrade radiation efficiency, while routing standard coax instead of a clear, insulated high-voltage feeder between an MF/HF ATU and its whip—or neglecting the vessel RF ground—severely attenuates range and blocks tuning18. Insufficient physical separation between main transmitting antennas and DSC watchkeeping whips similarly induces receiver desensitization42. On the data bus, failed NMEA splitters or improper differential wiring—such as leaving the NMEA -/B listener return floating or tying differential B to ground on single-ended interfaces—corrupts or drops mandatory GNSS position updates to DSC and Satcom consoles18. Within battery lockers, leaving lead-acid banks discharged causes sulfation (dropping Specific Gravity and permanent capacity), overcharging warps plates and boils off electrolyte, and grime across battery casings creates parasitic surface discharge paths106. Finally, under Paris MoU Port State Control guidelines (PSCC58-2025-02), discrepancies against the Form R Record of Equipment, incorrect Call Sign or MMSI markings on transceivers or EPIRBs, expired consumables, or loss of Regulation 4 distress alerting capability represent detainable deficiencies5.
References
- RESOLUTION MSC.496(105) (adopted on 28 April 2022, https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MSCResolutions/MSC.496(105).pdf
- Amendments to SOLAS Chapter IV (Radiocommunications)., https://www.irclass.org/technical-circulars/amendments-to-solas-chapter-iv-radiocommunications/
- gmdss - SeaLagom, https://www.sealagom.com/media/marine_resources/2025/12/IMO_GMDSS_Manual_2024_Edition.pdf
- Slik fungerer Cospas-Sarsat | 406 MHz-beacons & registrering, https://oceansignal.com/no/news/cospas-sarsat-og-beacon-registrering-den-komplette-guiden/
- solas chapter iv, 2022 amendment, and the gmdss (global maritime, https://parismou.org/download/pscc58-2025-02-guidelines-on-gmdss/
- Radiocommunications - International Maritime Organization, https://www.imo.org/en/OurWork/Safety/Pages/Radiocommunications-Default.aspx
- SOLAS 2024 — Chapter IV - imorules, https://www.imorules.com/solas/05_chapter_IV.html
- Inmarsat C, https://www.inmarsat.com/safety/inmarsat-c/
- Resolution A.1203(34) (Adopted on 3 December 2025) (Agenda, https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/AssemblyDocuments/A.1203(34).pdf
- Differences among VFH, HF, MF in GMDSS - Hi-Sea Marine, https://en.hiseamarine.com/products/differences-among-vhf-hf-mf-in-gmdss.html
- GMDSS FAQs | Iridium, https://www.iridium.com/gmdss-faqs
- Inmarsat Maritime - SafetyNET Handbook, https://www.inmarsat.com/content/dam/viasat-maritime/documents/safety/SafetyNET_Handbook_Edition_Six_April_2020_Final.pdf
- MSC.1/Circ.1613/Rev.2 5 July 2023 IRIDIUM SAFETYCAST, https://wwwcdn.imo.org/localresources/en/OurWork/Safety/Documents/Documents%20relevant%20to%20GMDSS/MSC.1-Circ.1613-Rev.2.pdf
- NAVTEX Guide: Frequencies, Message Format & B2 Codes (2026), https://imariners.com/guide-to-navtex-receiver/
- RESOLUTION MSC.471(101) (adopted on 14 June 2019, https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MSCResolutions/MSC.471(101).pdf
- SART and AIS-SART: Radar Marks and Survival VHF - iala colreg, https://ialacolreg.com/en/gmdss/gmdss-module-9-sart-survival-vhf
- COMSAR.1-Circ.32-Rev.3 - International Maritime Organization, https://wwwcdn.imo.org/localresources/en/OurWork/Safety/Documents/IMO%20Documents%20related%20to/COMSAR.1-Circ.32-Rev.3.pdf
- Bridge & GMDSS Radio Equipment. Overview and Troubleshooting, https://www.eto-engineer.com/2026/04/bridge-gmdss-radio-troubleshooting.html
- Iridium GMDSS – An Improved, Truly Global Solution, https://static.mackaycomm.com/wp-content/uploads/2024/02/Mackay-GMDSS-Iridium-vs.-Inmarsat-Comparison-Solution-Flyer-A4-01-24-v02-HR.pdf
- IMO Revised Performance Standards for EPIRBs and VDRs, https://ww2.eagle.org/content/dam/eagle/regulatory-news/2022/Regulatory%20News%20-%20IMO%20Revised%20Performance%20Standards%20for%20EPIRBs%20and%20VDRs.pdf
- 01/11/1974 SOLAS-verdrag; Regulation 13 Sources of energy, http://www.kustcodex.be/kustcodex-consult/plainWettekstServlet?wettekstId=51103&lang=nl
- What is an EPIRB: Cospas-Sarsat, AIS, HRU Release & Testing, https://navlib.net/en/what-is-epirb-emergency-position-indicating-radio-beacon/
- Radar SART vs AIS-SART: 7 Critical Differences - F&C Marine, https://www.fcmarine.co.uk/radar-sart-vs-ais-sart/
- Navtex / Værfaks | www.landorlarsen.no, https://www.landorlarsen.no/navtex-vaerfaks
- Search and rescue transponder - Wikipedia, https://en.wikipedia.org/wiki/Search_and_rescue_transponder
- AIS-SART: The symbol in ECDIS. (Source: [14, p. 2-154]), https://www.researchgate.net/figure/AIS-SART-The-symbol-in-ECDIS-Source-14-p-2-154_fig3_335160557
- MGN 641 (M) Guidance on radiocommunications under chapter IV, https://www.gov.uk/government/publications/mgn-641-m-guidance-on-radiocommunications-under-chapter-iv-of-solas/mgn-641-m-guidance-on-radiocommunications-under-chapter-iv-of-solas
- GMDSS Reserve Source or Power - USCG Navigation Center, https://navcen.uscg.gov/gmdss-reserve-source-power
- ABS REGULATORY NEWS, https://ww2.eagle.org/content/dam/eagle/regulatory-news/2024/Amendment-to-SOLAS-Chapter-IV.pdf
- MODERNIZATION OF GMDSS – ENTRY INTO FORCE ON 1, https://marine-offshore.bureauveritas.com/newsroom/modernization-gmdss-entry-force-1-january-2024-amended-solas-chapter-iv
- GMDSS Sea Areas A1–A4 and MSI (NAVTEX, EGC) - CaptainCalc, https://captaincalc.com.tr/en/blog/gmdss-sea-areas-a1-a4-msi-navtex.html
- The Difference RADAR SART and AIS SART - Marine Electronics, https://www.imarinex.com/comparison-between-radar-sart-and-ais-sart/
- Outcome of MSC 105, https://www.krs.co.kr/TECHNICAL_FILE/MSC%20105%20Outcome%20presentation.pdf
- Radiocommunications - DGMA, https://dgma.gov.in/nautical-wing/nw-radio-communications
- Convention on the International Maritime Satellite Organization, https://www.imo.org/en/about/conventions/pages/convention-on-the-international-maritime-satellite-organization.aspx
- SOLAS Convention and related mandatory Codes, https://www.krs.co.kr/TECHNICAL_FILE/Attach_Amendments%20to%20SOLAS%20and%20mandatory%20Codes%20in%20year%202024.pdf
- Operational procedures for the use of digital selective-calling (DSC, https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.541-7-199702-S!!PDF-E.pdf
- Modern Maritime Communication Technologies and the GMDSS, https://amphenolprocom.com/navigating-the-waves-modern-maritime-communication-technologies-and-the-gmdss-framework/
- GMDSS - Fartsområder kommende nye regler, https://www.brommeland.no/fartsomraader/gmdss-fartsomraader-og-kommende-nye-regler-1
- Maritime Safety Information (MSI), https://iho.int/uploads/user/Inter-Regional%20Coordination/RHC/NIOHC/NIOHC19/NIOHC19-23-MSI-update.pdf
- GMDSS Modernization for 2024 Safety | PDF | Radio - Scribd, https://www.scribd.com/document/702928181/GMDSS-2-0-09-10-2023
- Recommendation ITU-R M.493-16 (12/2023) - Digital selective, https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.493-16-202312-I!!PDF-E.pdf
- Digital selective calling - Wikipedia, https://en.wikipedia.org/wiki/Digital_selective_calling
- Recommendation ITU-R M.493-9, https://rofficer.narod.ru/docs/itur_4939.htm
- M.493-9 - Digital selective-calling system for use in the maritime, https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.493-9-199710-S!!PDF-E.pdf
- xng/docs/notes/DSC.md at master - airframesio - GitHub, https://github.com/airframesio/xng/blob/master/docs/notes/DSC.md
- RECOMMENDATION ITU-R M.493-11 - Digital selective-calling, https://www.itu.int/dms_pubrec/itu-r/rec/m/r-rec-m.493-11-200405-s%21%21pdf-e.pdf?utm_source=chatgpt.com
- ITU REC.M-493-13, https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.493-13-200910-S!!PDF-E.pdf
- Digital selective-calling system for use in the maritime mobile service, https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.493-15-201901-S!!TOC-HTM-E.htm
- Technical (GMDSS) Propagation, Modulation, Equipment, Antenna, https://www.cultofsea.com/gmdss/technical-aspects-of-gmdss-equipments-propagation-modulation-equipment-antenna-frequency/
- Marine MF/HF Radio Systems: 11 Essential Points, https://www.fcmarine.co.uk/marine-mf-hf-radio-systems-explained/
- Assignment Guide for Maritime Mobile Bands 4-26 MHz, https://tci.gov.fm/documents/communications/regulations/fsmc-title21-annexH.pdf
- R15-WRC15-C-2015!!MSW-E - ITU, https://www.itu.int/dms_pub/itu-r/opb/act/R-ACT-WRC.12-2015-TOC-HTM-E.htm
- MF/HF Radio Wave Propagation Dennis Silage K3DS - Temple Sites, https://sites.temple.edu/tuarc/files/2026/03/LF_HF-Radio-Wave-Propagation.pdf
- Radio Propagation - Chieftain Training, https://chieftain.training/radio-propagation/
- VHF/MF/HF antennas and cable connections - eGMDSS.com, https://www.egmdss.com/gmdss-courses/mod/page/view.php?id=2349&lang=fi
- Safety at Sea: Inmarsat C Vs Iridium GMDSS - OceanWeb Ltd, https://www.oceanweb.com/safety-at-sea-inmarsat-c-vs-iridium-gmdss/
- The L-Band Choice - SATMARIN, https://satmarin.com/knowledge/the-l-band-choice/
- SafetyNET | Inmarsat Maritime, https://www.inmarsat.com/safety/maritime-rescue-co-ordination-centres/safetynet/
- What is SafetyNET & SafetyNET II: The Complete Guide, https://www.marinepublic.com/blogs/training/192631-what-is-safetynet-safetynet-ii-the-complete-guide
- Maritime safety communication modernised as Inmarsat launches, https://www.inmarsat.com/news/latest-news/maritime/2022/maritime-safety-communication-fleet-safety-launched/
- Iridium GMDSS – An Improved, Truly Global Solution, https://www.mackaycomm.com/files/mackay-gmdss-iridium-vs-inmarsat-comparison-solution-flyer/
- Which Iridium System Fits Your Vessel? A Plain Guide to Choosing, https://thrane.eu/which-iridium-system-fits-your-vessel-a-plain-guide-to-choosing-satcom/
- NAVTEX MANUAL, https://www.mardep.gov.hk/filemanager/en/share/msnote/pdf/msin2315anx1.pdf
- Stay Alert, Stay Safe: Understanding NAVTEX for Sailors, https://www.rubicon3adventure.com/stay-alert-stay-safe-understanding-navtex-for-sailors/
- NAVTEX - Wikipedia, https://en.wikipedia.org/wiki/NAVTEX
- What is NAVTEX and how it works, the Complete Guide, https://www.marinepublic.com/blogs/training/820808-complete-navtex-guide-understanding-maritime-communication
- Fldigi Users Manual: NAVTEX and SITOR-B, https://www.w1hkj.org/FldigiHelp/navtex_and_sitorb_page.html
- NAVTEX Safety Information, http://www.siranah.de/html/sail018k.htm
- NAVTEX On Ships: Working, Types Of Messages And Advantages, https://www.marineinsight.com/navtex-on-ships/
- MSC.1/Circ.1403/Rev.2 28 November 2022 NAVTEX MANUAL 1, https://wwwcdn.imo.org/localresources/en/OurWork/Safety/Documents/Documents%20relevant%20to%20GMDSS/MSC.1-Circ.1403-Rev.2.pdf
- 5.3 B2 – Subject Indicator Character - imorules, https://www.imorules.com/GUID-55219FE0-62D4-4433-A1B7-1436A9E792C2.html
- AIS EPIRB (COSPAS-SARSAT), https://www.nsrmarine.com/ueditor/php/upload/file/20230526/1685082357740677.pdf
- Slik fungerer Cospas-Sarsat | 406 MHz-nødsendere og registrering, https://oceansignal.com/pl/news/cospas-sarsat-og-registrering-av-nodsendere-den-komplette-guiden/
- Technical Notice on the change of 406 MHz EPIRB channel, https://www.ccs.org.cn/ccsewwms2007/displayFileInfo.do?project=wms&file=8a81851c8d393884018d729cdcbf0025&name=/wms/Technical%20Notice%20on%20the%20change%20of%20406%20MHz%20EPIRB%20channel1707024899262.pdf
- How the EU Space Programme supports Search and Rescue, https://eu-space.europa.eu/news/observer-how-eu-space-programme-supports-search-and-rescue-galileo-sar-meet-2025
- COSPAS-SARSAT - eoPortal, https://www.eoportal.org/satellite-missions/cospas-sarsat
- International Cospas-Sarsat Programme - Wikipedia, https://en.wikipedia.org/wiki/International_Cospas-Sarsat_Programme
- MEOSAR Overview - dco.uscg.mil, https://www.dco.uscg.mil/Portals/9/CG-5R/EmergencyBeacons/2016SarsatConf/Presentations/SAR_2016_Mar%201_%20MEOSAR%20Overview_LeBeau.pdf
- U.S. Search and Rescue Satellite- Aided Tracking (SARSAT) Overview, https://www.gps.gov/sites/default/files/2026-04/Foster%20CGISC_SARSAT_Final.pdf
- Search and Rescue (SAR) / Galileo Service, https://www.gsc-europa.eu/galileo/services/search-and-rescue-sar-galileo-service
- Search and Rescue Satellites - SARSAT - NOAA, https://www.sarsat.noaa.gov/search-and-rescue-satellites/
- SAR/Galileo Operational Notifications | European GNSS Service, https://www.gsc-europa.eu/system-service-status/sar-information/sargalileo-operational-notifications
- AIS EPIRB with RLS – Comprehensive Guide - Sharp Horizon, https://sharphorizon.pl/en/epirb-and-ais-epirb-a-key-to-maritime-safety/
- JOTRON TRON 60AIS EPIRB with float-free bracket and HRU, https://www.toplicht.com/safety-vhf-radio/distress-beacons/epirb/jotron-tron-60ais-epirb-with-float-free-bracket-and-hru
- MED Compliance with IMO Resolution MSC.471(101) - CIRM, https://cirm.org/storage/files/CIRM%20Position%20Paper%20-%20MED%20compliance%20with%20IMO%20Res%20MSC%20471(101)%20-%20September%202021.pdf
- Boater's Guide To EPIRBs - ACR Electronics, https://www.acrartex.com/wp-content/uploads/2022/08/ACR-Boaters-Guide-to-EPIRBs-Booklet_WEB.pdf
- RESOLUTION MSC.246(83) (adopted on 8 October 2007, https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MSCResolutions/MSC.246(83).pdf
- What is Radar SART and AIS SART, https://www.prosmarine.com/what-is-radar-sart-and-ais-sart/
- RESOLUTION MSC.510(105) (adopted on 28 April 2022, https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MSCResolutions/MSC.510(105).pdf
- Marine Search and Rescue Radar Transponder (SART) - hzh marine, https://www.hzhmarine.com/news/marine-search-and-rescue-radar-transponder-sart-the-core-equipment-for-maritime-distress-location.html
- SART (Search and Rescue Radar Transponder), https://www.nsrmarine.com/ueditor/php/upload/file/20220106/1641458709122171.pdf
- SART – skipsradiosystem - Store norske leksikon, https://snl.no/SART_-_skipsradiosystem
- SART and AIS-SART - Ensuring Crew Safety - Sharp Horizon, https://sharphorizon.pl/en/sart-en/
- MMSI-oppslag – hva betyr de ni sifrene? - Maritim Startside, https://www.maritimstartside.no/mmsi.html
- AIS SART (Search And Rescue Transponder) approved and being, https://www.nautinst.org/resources-page/ais-sart-search-and-rescue-transponder-approved-and-being-fitted.html
- Search and Rescue Transponder (SART): A Comprehensive Guide, https://www.hzhmarine.com/news/search-and-rescue-transponder-sart-a-comprehensive-guide.html
- SN.1/Circ.243/Rev.2 14 June 2019 GUIDELINES FOR THE, https://iho.int/uploads/user/About%20IHO/International_Organisations/ECDIS-ENC/English/SN_Circ243-Rev.2%20-%20Guidelines%20For%20The%20Presentation%20Of%20Navigation-Related%20Symbols%20Terms%20And%20Abbreviations.pdf
- SART og AIS-SART | Varslingsteknologi til båtførerprøven - Eteo, https://eteo.no/teori/batforerproven/kommunikasjon-og-nodssignaler/sart-og-ais-sart/
- GMDSS Equipment Maintenance: Radio Communication System, https://marineinspection.app/article/gmdss-equipment-maintenance-radio-communication-ships
- GMDSS Equipment Inspection Checklist for Vessel Compliance, https://www.amnautical.com/blogs/the-mariners-blog/gmdss-radio-equipment-inspection-checklist-for-commercial-vessels
- Daily, Monthly And Weekly Tests Of GMDSS Equipment On Board, https://www.marineinsight.com/gmdss-equipment-tests-on-ships/
- GMDSS Equipment Testing: Daily, Weekly & Monthly Procedures, https://www.studocu.vn/vn/document/dai-hoc-hang-hai-viet-nam/truong-dai-hoc-hang-hai-viet-nam/gmdss-equipment-testing-daily-weekly-monthly-procedures/168476057
- GMDSS Battery Onload/Offload Testing Guide | PDF - Scribd, https://www.scribd.com/document/887803562/Gmdss-Batt-Onload-Offload-Test
- GMDSS Radio Equipment Test Requirements - Bluewater Miles, https://bluewatermiles.com/docs/gmdss-radio-equipment-tests.pdf
- GMDSS equipment inspection frequency - Связь и Радионавигация, https://cirspb.ru/en/blog/info-radio/tests-of-gmdss/
- GMDSS Battery Testing and Maintenance Guide | PDF - Scribd, https://www.scribd.com/document/870017777/GMDSS-Batteries-Testing-and-Checking
- The NMEA 0183 Information sheet - UiB, https://web.geo.uib.no/polarhovercraft/uploads/Main/The20NMEA20018320Information20Sheet.pdf